PRODUCT DESCRIPTION

TYPICAL PROPERTIES OF UNCURED MATERIAL

TYPICAL PROPERTIES OF CURED MATERIAL

TYPICAL ENVIRONMENTAL RESISTANCE

Heat Aging

Aged at temperature indicated and tested @22 °C

At 260°C, softening is due to reversion and willoccurregardless of how the sealant is cured. For flange sealing, thissofteningis usually an attribute.

At 315°C, hardening is due to thermal rearrangement ofthepolymer and also oxidation. Oxidation is retarded when theproduct is used asa flange sealant.

GENERAL INFORMATION

This product is not recommended for use in pure oxygenand/oroxygen rich systems and should not be selected asa sealant for chlorine orother strong oxidizing materials.For safe handling information on this product,consult theSafety Data Sheet (SDS).

Directions for use

1. For best performance bond surfaces should be clean andfree fromgrease

2. Full performance properties will develop over 24 hours.

3. Moisture curing begins immediately after the product isexposedto the atmosphere, therefore parts to beassembled should be mated within a fewminutes after theproduct is dispensed.

4. Press or firmly clamp parts together. Do not slidepartstogether.

5. Excess material can be easily wiped away withnon-polarsolvents.

6. Excess cured material can be removed with a knife orsingle edgerazor blade.